Zettle Reader and connectivity

PayPal Reader

Connects to your device using Bluetooth Low Energy or USB-C wired connection.
Accepts chip and PIN, contactless (tap) payments, and mobile payments including Apple Pay, Google Pay and Samsung Pay.
For chip & PIN payments, and contactless payments above a certain amount, transactions are approved with the customer’s PIN or signature.
Fast, stable and easy to use – contactless card payments and transactions under £30 are approved in seconds (amount may differ between market).
Charges via USB-C cable. Compatible with PayPal Reader Dock.
Up to eight-hour battery life depending on use.

How to setup your PayPal Reader

When you receive your card reader and unbox it, you will find these items inside the packaging alongside the PayPal Reader:

Power adapter USB-C,
USB-C to USB-C cable,
PayPal Electronics Warranty Leaflet,
one horizontal sticker, one vertical sticker and one paper table tent card - all to display accepted card schemes.

Should you have also purchased a PayPal Reader Dock, please refer to “How to setup your PayPal Dock” further below, for more help.

To start using your card reader, you first need to pair your reader to the Zettle by PayPal app on your smartphone or tablet. You can do so either via Bluetooth, or via USB-C cable.

PayPal Reader and Bluetooth connection

Connect the card reader to your supported smartphone or tablet through Bluetooth. The connection works the same way for iOS and Android.

To connect the reader through Bluetooth, you can either scan the QR-code shown on the reader when powering on. Or open the Zettle by PayPal app, navigate to Settings > Card readers and follow the instructions on screen.

PayPal Reader and USB connection

iOS (coming soon)
Android:
Connect your point-of-sale device to the PayPal Reader with a USB cable.  
The reader will charge through and can connect with the point-of-sale device. If you disconnect the cable, the reader will attempt to connect via Bluetooth.

How to setup your PayPal Dock

Remove the base from the dock by pressing the tab at the bottom of the base and lifting the base up from the top.
To power the dock, connect the card reader cable into the USB-C port on the back of the dock. 
To secure the card reader to the dock, turn the imbedded security screw on the back of the dock until fastened. If you don’t want to secure the reader to the dock, it will simply magnetically attach to the dock and charge. 
If you’re securing the angled base to a surface, remove the rubber feet on all four corners and screw the base in at each corner to the surface. 
Snap the dock onto the angled base. Plug the other end of the USB-C cable into any of the following: power adapter, kiosk, tablet, or receipt printer.

Zettle Reader 2

Connects to your device via Low Energy Bluetooth
Accepts chip and PIN, contactless (tap) payments, and mobile payments including Apple Pay, Google Pay and Samsung Pay
For chip & PIN payments, and contactless payments above a certain amount, transactions are approved with the customer’s PIN or signature
Fast, stable and easy to use – contactless card payments and transactions under £30 are approved in seconds (amount may differ between market)
Charges via USB cable (approximately 1‒2 hours). Compatible with Zettle Dock 2.
Up to eight-hour battery life (100 transactions)

Zettle Reader and Bluetooth connection

To connect a card reader with your supported smartphone or tablet, open the Zettle PayPal app and go to Settings > Card Reader.

Now simply follow the instructions on the screen.

Compatible smartphones and tablets

Our card readers can be used with a variety of iOS and Android devices. Note that you need to connect your reader to your device via Bluetooth or USB-C wired connection (depending on your card reader model and POS platform), before you can use it. Check here whether your device is compatible and verify that you have updated the operating system on your smartphone/tablet to the available latest version.

Important notice regarding use
Zettle by PayPal supplies the card reader device for use by you or your business, as applicable, and you agree not to use the product for any re-sale purposes. You must not use the product for any purpose other than effecting payment transactions through your installed version of the Zettle mobile software application. You may not modify the software or the hardware of the product in any way, save to the extent permitted by mandatory law.

Handling and caring for your Reader

Keep the card reader in a cool, dry place (ideally, 22° C). Use a soft, damp cloth to clean the device’s exterior. Do not spray any type of liquid directly onto the device, and avoid exposure of any of its openings to moisture. Do not use solvents. Ensure that nothing enters your card reader through any openings, such as the card slots. Avoid causing shock or negligent handling of your card reader.

User Manuals

Find your reader below to download the manual.

The Zettle Reader 2:

The Zettle Reader:

Card readers and connectivity